Export Management

Project 02 — Specialty polymers

Polymers, from
the people who
make them.

One of our co-founders is a polymer engineer with 31 years in the polymer industry, in manufacturing and import: automotive parts, polymer raw materials, and sourcing from producers abroad. We supply three families of compounds from partner producers we have assessed and qualified.

TPE compound pellets, natural and black

31

years in the polymer industry, in manufacturing and import.

  • Manufacturing of automotive parts
  • Production of polymer raw materials
  • Import of polymers from producers abroad
  • Grade selection and supplier qualification

A — Thermoplastic elastomers

TPE family:
TPS, TPV and TPO.

Thermoplastic elastomers behave like rubber but process like plastic. They are injection moulded or extruded on standard equipment, need no vulcanisation step, and production scrap can be reground.

TPS

Styrenic block copolymers

SBS and SEBS based compounds. Soft to the touch, easy to colour, and able to bond to PP and other rigid plastics in two-shot moulding.

Common uses

  1. 01Soft-touch grips on tools and handles
  2. 02Toothbrush and personal-care handles
  3. 03Seals, gaskets and anti-slip feet
  4. 04Footwear soles
  5. 05Tubing and medical components (grade dependent)
Hand holding a power drill with a soft-touch grip
Toothbrush with a moulded handle

TPV

Thermoplastic vulcanisates

EPDM rubber vulcanised inside a polypropylene matrix. Close to EPDM rubber in heat, weather and compression-set resistance, with thermoplastic processing.

Common uses

  1. 01Automotive door and window seals
  2. 02Glass-run channels and weatherstrips
  3. 03Under-hood air ducts and protective boots
  4. 04Hoses and flexible tubing
  5. 05Building and window gaskets
Car window frame with a black rubber seal
Coiled green flexible hose

TPO

Thermoplastic polyolefins

Polypropylene blended with an elastomer and often a mineral filler. Light, impact-resistant at low temperatures, paintable and weather-resistant.

Common uses

  1. 01Bumper fascias and exterior trim
  2. 02Instrument panel skins and interior trim
  3. 03Wheel-arch liners and splash guards
  4. 04Roofing membranes
  5. 05Wire and cable insulation
Front corner of a car with a moulded bumper
Car dashboard with air vents and trim

B — Polyamide compounds

Polyamide compounds
for engineering parts.

PA6 and PA66 compounds for parts that must stay strong, stiff and stable under heat, oil and load. The base polymer, reinforcement and additives are matched to the part.

Grades

  • PA6 and PA66
  • Glass-fibre reinforced, 15–50 %
  • Mineral filled
  • Impact-modified
  • Heat-stabilised
  • Flame-retardant
PA6 compound pellets, natural and glass-filled

Common uses

  • Engine bay with air intake and covers

    01Under the hood

    Air intake manifolds, engine covers, radiator end tanks and cooling-system parts.

  • Close-up of a multi-pin electrical connector

    02Electrical

    Connectors, terminal blocks, switch housings and circuit-breaker parts.

  • Black cable ties on an orange background

    03Fastening

    Cable ties, clips and fixings that must hold under tension.

  • Black injection-moulded engineering part

    04Structural parts

    Housings, brackets, gears and bearings in power tools, appliances and machinery.

C — Tie-layer adhesives

Tie-layer adhesives
for multilayer structures.

Maleic-anhydride-modified polyolefins that bond layers which would not otherwise stick: polyethylene or polypropylene to EVOH, polyamide or metal. Supplied from a regional producer we have qualified, as an alternative to imported adhesive resins.

Grades

  • LDPE and LLDPE based
  • HDPE based
  • PP based

Processes

  1. 01Blown and cast film co-extrusion
  2. 02Sheet co-extrusion and thermoforming
  3. 03Co-extrusion blow moulding
  4. 04Pipe and steel-pipe coating
  5. 05Extrusion coating and lamination

Common uses

  • Vacuum-packed meat in clear barrier film

    01Barrier food packaging

    Multilayer films and trays with EVOH or PA barriers for meat, cheese and ready meals.

  • Plastic film running through a film line

    02Film lines

    Tie layers in blown and cast film structures such as PE / tie / EVOH / tie / PE.

  • Workers on a coated steel pipeline in a trench

    03Steel pipe coating

    The adhesive layer in three-layer polyethylene and polypropylene coatings for oil, gas and water pipelines.

  • White squeeze tube standing on a grey surface

    04Tubes and containers

    Laminate and co-extruded tubes for cosmetics and toothpaste, fuel tanks and chemical containers.

Quality

Specified, sampled,
tested.

Every producer we supply from has been assessed by our engineer. Each grade comes with a technical data sheet. We help you choose the grade for the part and the process, arrange samples for trials, and can arrange third-party test reports on request.

Polymer testing laboratory
Bagged resin on pallets